Phone And Pabx Calls; Making A Phone Or Pabx Call; Emergency Mode; Entering Or Exiting Emergency Mode - Motorola MTM800 Bedienungsanleitung

Phone and PABX Calls

The Phone Call allows you to call a landline telephone number or a
cellular mobile phone number.
The Private Automatic Branch Exchange (PABX) Call allows you
to call local (office) extension numbers. This type of call needs to be
activated by your Service Provider.
In this publication we use "phone number" when referring to these
numbers.
While Transmit Inhibit is activated, an incoming Phone or PABX Call is
indicated, but you cannot answer the call.

Making a Phone or PABX Call

1. From the Home display dial a number.
2. If Phone or PABX are not the first type of call presented, press
CType repeatedly to select the Phone or PABX call type.
3. Proceed as for making and receiving full-duplex Private Calls.

Emergency Mode

You can send and receive Emergency Group Calls in Trunked
Mode or in Direct Mode. If your terminal is configured to operate
through a gateway, Emergency calls can be placed through the
gateway.
You can initiate an Emergency Group Call to and receive it from:
• selected group (TMO and DMO) (if tactical emergency)
• predefined group (if non-tactical emergency).
Contact your Service Provider to know which is the selected mode.
Your Service Provider will configure the Emergency Alarm and Hot
Microphone features.
Emergency calls will be allocated emergency priority in the system.

Entering or Exiting Emergency Mode

To enter Emergency Mode, press and hold the Emergency button
28