Private Call; Making A Private Call; Receiving A Private Call - Motorola MTM800 Bedienungsanleitung

Private Call

A Private Call, also called Point-to-Point or individual call, is a call
between two individuals. No other terminal can hear the
conversation. This call can be:
• a full-duplex call (if the system allows) in TMO, or
• a standard half-duplex call in TMO or DMO.

Making a Private Call

1. From the Home display dial a number.
2. If Private is not the first type of call presented, press CType to
select the Private Call type.
3. For a half-duplex call, press and release the PTT button. You will
hear a ringing tone. Wait for the called person to answer your call.
4. Press and hold PTT. Wait for the talk permit tone (if configured)
before talking, and release the PTT when listening.
5. For a full-duplex call, press and release
ringing tone. Wait for the called person to answer your call.
6. To end the call, press
Call Ended message is displayed.
While Transmit Inhibit is activated, an incoming Private Call is indicated,
but you cannot answer the call.

Receiving a Private Call

1. The MTM800 Enhanced switches to the incoming Private Call.
The display shows the caller's identity.
Depending on the provider settings the call is answered automatically
or by pressing appropriate buttons.
2. To answer an incoming half-duplex call, press PTT. To answer an
incoming full-duplex call (indicated by Spkr/Erpc soft keys),
press
3. To end the call, press
Your terminal can alert you of an incoming call. Select the alert settings
in the Tones menu items
. If the called person ends the call, the
.
.
. You will hear a
27