Malfunctions And Remedies; Temperature Setting; Assistance Service - IARP Bravo serie Gebrauchs- Und Bedienungs Anleitungen

Malfunctions and remedies

The appliance isn't working at all? Check that:
- The power system is working.
- The thermostat is not in position (0) stop.
- The power cable isn't broken.
- The plug is properly inserted in the power outlet
The internal temperature is not satisfactory? Check that:
- The perfect closing of the glass covers.
- The temperature setting.
- The unit is not placed too close to any heating source.
- Behind the cabinet air can properly circulate.
The internal temperature is too low? Check that:
- The thermostat position.
The unit is noisy? Check that:
- The unit is placed on an even surface.
The following events are to be considered normal: The outside of the casing is hot (this happens
on purpose to avoid maintenance on the condenser). Clicking sounds, due to connection and discon-
nection of the compressor. Gurgling and/or creaking noises coming from the machine: this is caused
by circulating cooling liquid.

Temperature setting

Each refrigerating appliance is provided with a thermostat for automatic maintenance of the appropriate
preestablished temperature inside the tank.
This temperature adjuster is gauged by the factory and should not be touched by the user. Only if the
average internal temperature is too cold or not cold enough should the knob turned.
CONTROLS
1) Thermostat
2) Supply line led alight: appliance connected
3) Thermometer

Assistance service

Before contacting the Assistance Service:
Verify if you can solve the malfunction problems by yourself (refer to the malfunction guide).
Restart the machine to make sure that the problem is solved. Should the problem persist or not be
solved, contact the Assistance Service and state the following data:
Type of malfunction.
The machine's make.
The machine's identification number.
Your complete address.
MID
MIN
1
-12-
POWER
MAX
3
2