Other Convenient Functions - Sharp R-360 Bedienungsanleitung

MICROWAVE COOKING
NOTE:
• When the oven starts, the oven lamp will illuminate.
• If the door is opened during cooking/defrosting to stir or turn over food, the cooking
time on the display will stop automatically. The cooking/defrosting time starts to count
down again when the door is closed and the START/QUICK START key is pressed.
• When cooking/defrosting is complete,the display will show "End".Open the door and
close,or press any button ,the time of day will reappear on the display,if the clock has
been set.
• If you wish to know the power level during cooking, press the MICRO POWER key. The
current power level will displayed for 3 seconds.

OTHER CONVENIENT FUNCTIONS

1. DELAY TIMER
With this function, you can preset the program and the microwave oven will start to work
according to the program automatically later.
• In standy by mode, set your desired cooking program.
• Press the DELAY TIMER key once, the time of the day will display and the delay timer
indicator will illuminate.
• Press the number keys "10Min" "1Min" "1Sec" to set the time when you want to start the
program.
• Press the START/QUICK START key, once the clock reach the preset time, the system
will start the preset program automatically.
NOTE:
• In delay timer state, press the DELAY TIMER key once, the preset cooking time will be
diaplayed for 5 seconds. You can press STOP/CLEAR key to cancel the delay timer func-
tion.
• Quick start, time defrost and weight defrost can not use the delay timer function.
2. QUICK START
Direct start
You can directly start cooking on P100 microwave power level for 30 seconds by pressing
the START/QUICK START key. The cooking process will start immediately and each time the
button is pressed this will increase the cooking time by 30 sec.
NOTE: The cooking time may be extended to a maximum of 10 minutes.
3. CHILD LOCK
Use to prevent unsupervised operation of the oven by children.
a. To set the CHILD LOCK:
In the stand-by mode, press STOP/CLEAR key for 3 seconds. There will be a long beep de-
noting entering the children-lock state and the
the current clock time.
b. To cancel the CHILD LOCK:
In the stand-by mode, press STOP/CLEAR key for 3 seconds. There will be a long "beep"
denoting that the lock is released.
User_manual_R360_WEST.indb 19
indicator will illuminate together with
GB-19
2016-08-10 16:19:31