C60T376A8.qxd 14/3/07 16:21 Página 6
3
4
IMPORTANT
Installation must guarantee that fresh air can come from the rear and that a vent measu-
ring at least 5 mm allows the air to escape in the front part.
Downloaded from
www.Manualslib.com
FASTENING TO THE WORKTOP
A
Fit the hob into the space in the
unit pressing down well to close
the seal properly.
B
Fix the four hob plate hooks
underneath in the unit space cor-
ners.
INSTALLATION POSITION
There must be a current of fresh air to cool your induction hob's electronics circuits as
shown in the diagram.
40mm minimum
Hob on oven
50mm
manuals search engine
5mm minimum
50mm
Hob on unit
6
5mm minimum