Warranty And Disclaimer; Responsibilities Of The Operator; Licensing Conditions; Description Of Symbols Listed - BWT THERO 90PRO Einbau- Und Bedienungsanleitung

EN

1.4.2 Warranty and disclaimer

Observe: The information and instruc-
tions contained in this Installation and
Operating Manual were compiled
based on current standards and regu-
lations, the state of the technology,
and our many years of experience and
observation.
The warranty is void in any of the following
cases:
• Failure to follow the provisions and informa-
tion in this IOM
• Improper use
• Improper or faulty installation
• Improper start-up, operation or maintenance
• Use of non-approved components or non-
original parts
• Neglecting to perform the required service
and replacement tasks
• Technical modifications: damage, faults and
stoppages resulting from unauthorised alter-
ations

1.4.3 Responsibilities of the operator

• The installation and operating manual (IOM)
must be easily accessible and kept in the
immediate vicinity of the device.
• The device must be operated in a techni-
cally faultless and operationally safe condi-
tion only.
• The provisions in the IOM are to be followed
absolutely.

1.4.4 Licensing conditions

This IOM is protected by copyright law. Sur-
rendering the manual to any third party, dupli-
cation of any kind and form - also in excerpts
- as well as the utilisation and/or communi-
cation of the content are not permitted with-
out the written consent of the manufacturer.
Infringements obligate to pay compensation
for damages. Further claims are reserved.

1.4.5 Description of symbols listed

This installation and operating manual uses
the following symbols. The warnings/instruc-
tions are introduced by signal words to under-
line risks. The warnings/instructions absolutely
must be complied with. The operator must
act carefully to avoid accidents and property
damage.
17
Danger: Electric current or voltage!
Always consult a qualified electrician
when working on places denoted by
this symbol.
Attention: Dangerous spot!
Details or orders and prohibitions to
avoid personal injury or extensive
damage to property.
Observe: Underlines useful recommen-
dations and information for an efficient
operation free of any interruptions.
Note: Additional information for the
operator.

1.5 Operating and safety notes

This section gives an overview of all
operational and safety aspects important for
ensuring safe and fault-free operation. Despite
all possible precautionary measures, some
residual risk remains with any product, espe-
cially if it is used improperly. Warranty claims
are void unless the provisions in this IOM are
observed and followed.

1.5.1 Proper use

This device is for desalination of drinking-
quality water at up to 30 °C and 0.2 MPa
(2 bar). It can be used either with or without
an atmospheric pressure tank (application
dependent). Consult your dealer about installa-
tion reccomendations.
Observe: The inflow water must not
exceed the limit values given in the
technical data nor the calcium
solubility limit!
The device shall only be used for its intended
purpose as designed and as described here in
this manual. Any other use is considered "im-
proper".
Warning! The device must be fed only
with cold water in drinking water
quality.

1.5.2 Permissible operation method

Observe: To protect the drinking
water, observe the country-specific
guidelines for drinking water installa-
tions in any work on the RO device.