Testing The Trampoline - Klarfit Jumpstarter Handbuch

TESTING THE TRAMPOLINE

After assembling the trampoline, it is important that you perform the following
safety checks:
Trampoline safety check
• Use a screwdriver to check that all screws are tight.
• Look under the trampoline mat and check that all springs are firmly
attached to the frame and triangle rings.
• Move the trampoline in all directions and check the stability of the frame.
• Use both hands to place your body weight on a section of the trampoline
and release to check that the floor is level.
• Check the cover and make sure that it completely covers all springs and
the frame.
• Make sure the strings of the cover are tied securely.
Safety net security check:
• Hold on to a pole net and check that all housing bars are stable by shaking
them.
• Check the safety net and the rod sheathings for tears in the stitching or
material.
• Check the function of the net closure and the entrance hooks.
• Check that all safety net hooks are attached to the triangle ring under the
trampoline.
Once all checks have been performed and the trampoline has passed all initial
tests (above), a person can test the trampoline by continuously jumping in the
middle of the trampoline for 5 minutes. When the trampoline feels sturdy, the
test is complete.
EN
41