Unpacking And Product Features; Assembly - Vacmaster JOEY Bedienungsanleitung

UNPACKING AND PRODUCT FEATURES

1 Handle
2 Power Switch
3 Speed Switch
4 Folding Handle Release Button
Handheld Vacuum Cleaner
5
Release Button
Power Switch & Battery
6
Charging Indicator
7 Handheld Vacuum Cleaner
8 Dust Bin Release Button
Motorised Floor Head
9
Release Button
1. Remove all the contents from the packaging; make sure you have all contents as listed on page 7.
2. This vacuum cleaner features a foldable handle for easy storage. Unfold the upper section of
the handle until it securely clicks into position. Make sure the handle is locked into place (Fig. 1).
3. Position the neck of the floor head into the upright position. Insert the complete handle
assembly onto the neck of the motorised floor head ensuring that there is nothing trapped
between the unit connections. Check that both security latches on the motorised floor head are
clicked into place (Fig. 2).
4. Place the handheld unit into the docking bay on the main body. Ensure the suction port of the
handheld unit is positioned into place first and that the dust bin is securely fitted before pressing
the handle into the locking position (Fig. 3).
5. Insert the vacuum cleaner support onto the charging base and click into place (Fig. 4).
10 Motorised Floor Head
11 LED Task Lights
12 Dust Bin
13 Filter (x2) (x1 pre-installed)
14 Filter Basket (pre-installed)
15 Charging Base
16 Charging Adapters
17 Combination Tool
18 Instruction Manual

ASSEMBLY

7
GB