Repeat section
♦
During playback press the A-B button
the section that you want to repeat .
screen .
♦
Press button A-B
a second time to set the end of the section .
5)
The
A-B symbol appears permanently on the screen and the
specified section is repeated endlessly .
♦
Press the A-B button
again to return to normal playback .
5)
Programming the playback order of tracks
With this programming function you can play up to 20 chapters (DVD)
or tracks (audio CD) in an order of your choosing . This function is not
available for MP3 media .
Press the PROGRAM button
♦
appears on the screen .
01
T T:
CH:
T T:
CH:
02
T T:
CH:
03
T T:
CH:
04
T T:
CH:
05
Exit
♦
Enter the desired track (TT) for program position 1 using the num-
bers on the numeric keypad
10+ repeatedly for the tens, then a numeric key for the second
digit .
♦
Enter the desired chapter (CH) for program position 1 using the
numbers on the numeric keypad
♦
After input, the cursor jumps to the next program position .
♦
Enter additional program positions in the same way . To enter 10
additional program positions, move the cursor to the "Next
entry at the bottom of the menu using the navigation keys
and confirm with the ENTER button
5*
♦
If you select the "Exit" entry at the bottom of the menu, the pro-
gramming function is aborted . All settings will be lost .
SPDP 18 A1
to set the beginning of
5)
A is displayed on the
. A table with 10 program positions
5#
T T:
CH:
06
T T:
CH:
07
T T:
CH:
08
T T:
CH:
09
T T:
CH:
10
Next
. To enter two-digit numbers press
5%
.
5%
.
5^
Starting a programmed playback sequence
As soon as the first program position has been entered, the word
"Start" appears at the bottom of the menu .
♦
Use the navigation keys
and press the PLAY/PAUSE
The preprogrammed playback sequence starts and "Program" is
permanently displayed on the screen during playback .
Use the PROGRAM button
♦
with the program positions again .
♦
To stop playback and clear the programmed playback order, press
the STOP button
At the end of the programmed playback sequence, the DVD player A
automatically switches to stop mode . The previously programmed
playback sequence is not saved .
Opening the DVD menu
Many DVD films contain a main menu on the disc with several options
besides the option to play the main film, e .g . playback of bonus
material .
Please note that it depends on the DVD which menu is displayed when
a key is pressed .
♦
Pressing the MENU button
the DVD .
♦
Pressing the TITLE button
Menu functions
Navigating the menus
♦
Press the SETUP button
Setup page appears .
Use the navigation keys
adjust all the settings in the menu .
–
Use the navigation keys
"
yellow marking under the corresponding menu symbol .
–
Use the navigation keys
moving the green bar over the item .
–
Use the
navigation key to switch to the submenu of an entry
and the
navigation key to go back one menu level .
–
To confirm a selection, press the ENTER button
–
To exit the setup menu, press the SETUP button
to move the cursor to "Start"
5*
or ENTER
button
4%
to call up and change the table
5#
twice .
5(
usually calls up the main menu of
6@
usually opens the DVD title menu .
6#
to enter the setup menu . The General
5&
and the ENTER button
5*
to select a menu by moving the
to select an item in a menu by
GB │ IE
.
5^
to
5^
.
5^
.
5&
│
■
35