Inserting/Connecting A Data Medium; Selecting The Playback Source; Adjusting The Volume/Muting - Silvercrest SPDP 18 A1 Bedienungsanleitung

Switching the screen on/off
During audio playback, you can separately switch the screen on the
DVD player A and the second monitor B on or off . The sound will
still be transmitted .
Press the DISPLAY ON/OFF button
♦
screen on or off .
♦ Press the TFT OFF button
3)
monitor B on or off .

Inserting/connecting a data medium

Inserting a DVD/CD
♦ Slide the disc compartment release OPEN
DVD player A to the left and fold the screen
the disc tray .
♦ Insert the DVD/CD so that the label side is facing up and press it
carefully onto the retaining hub in the middle until the DVD/CD
clicks into place .
♦ To close the disc compartment, gently push the screen
you hear it click into place .
DVD/CD playback normally starts automatically after a few seconds .
You may need to press the PLAY/PAUSE
may appear asking you to make a selection using the navigation keys
.
5*
Connecting a USB flash drive
You can connect a USB flash drive to the USB port
video, or image files .
CAUTION
► To avoid damaging the device, do not use a USB extension
cable and do not connect the device directly to the USB port of
a computer .
► The USB port is designed for use with USB flash drives only .
Other external storage media, such as external hard drives,
cannot be operated via the USB port .
♦ Insert a USB flash drive into the USB port
the DVD player A to play files from the USB flash drive .
■ 32 │ GB │ IE
to switch the DVD player A
3&
to switch the screen on the second
on top of the
q
forward to open
2!
back until
2!
button or a menu
4%
to play audio,
t
on the right side of
t
Connecting SD/MMC memory cards
You can insert an SD/MMC memory card into the memory card slot
to play back audio, video, or image files .
♦ Insert the memory card into the memory card slot
side of the DVD player A with the contacts to the rear and the
bevelled corner at the top .

Selecting the playback source

The default playback source of the device is DVD . If other media (USB
flash drive or SD/MMC memory card) are inserted, you can switch
between the playback sources .
Press the SOURCE button
♦
3*
playback sources (DVD, USB and SD) . When the DVD drive is
selected as the playback source, "DVD" or "CD" is displayed at the
top left of the screen after the data is read .

Adjusting the volume/muting

The main volume control , which controls the overall volume of the
o
AV OUT socket , the headphone jack
u
located on the side of the DVD player A . If the main volume con-
trol is set to minimum, no sound will be emitted or transmitted to the
o
second monitor B .
♦ Set the main volume control
volume range of the device .
♦ Then adjust the volume using the VOL
buttons on the remote control C or directly on the device with the
VOL and VOL
f g
DVD player A also affects the volume on the second monitor B .
♦ To adjust the volume of the second monitor B separately,
use either the volume control
VOL buttons .
2&
NOTE
► Press the VOL ( , ) button to adjust the volume of the DVD
f 4#
player A up to "16" . A message will appear to warn you of
possible hearing damage at high volume . You cannot increase
the volume up to "20" until you have confirmed this message
with the ENTER button
5^
♦ Press MUTE button to mute the sound on the DVD player A
4&
and the second monitor B .
♦ Press the MUTE button
4&
on the right
y
repeatedly to switch between the
and the speaker
i
to maximum to maintain the full
o
and VOL
4# 4$
buttons . Changing the volume on the
or the VOL and
3# 2^
or the OK button
.
h
again to cancel the mute function .
SPDP 18 A1
y
, is
2)