Exit Setup; Sound Functions; To Control The Volume; Mute - Silvercrest KH 6500 Bedienungsanleitung

PASSWORD
Here you can change the preset password
(888888) and enter your own password. Only the
numbers 0-9 can be used.
* * PASSWORD SETUP PAGE * * * * PASSWORD SETUP PAGE * * * * PASSWORD SETUP PAGE * *
PASSWORD MODE PASSWORD MODE PASSWORD MODE ON ON ON
PASSWORD PASSWORD PASSWORD CHANGE CHANGE CHANGE
CHANGE PASSWORD CHANGE PASSWORD CHANGE PASSWORD
• To change the password select the entry
CHANGE.
OLD PASSWORD X X X X
NEW PASSWORD
CONFIRM PW
OK
• Enter in the line OLD PASSWORD the valid
password with the number buttons. The tab chan-
ges to the next line NEW PASSWORD.
• Enter the new password with the number buttons.
The tab changes to the next line CONFIRM PW.
• Enter the new password with the number buttons.
The tab changes to the OK field.
OK/ENTER
• Press the button
been changed.
Note:
In the event that you forget your password you can
use the factory default password (888888).
. The password has now

8.6 EXIT SETUP

EXIT SETUP EXIT SETUP EXIT SETUP
• Select the last menu in the toolbar and press the
OK/ENTER
button

9. Sound functions

9.1 To control the Volume

VOL+
Press the button
VOL-
Press the button

9.2 Mute

MUTE
Press the button to switch off the sound.
To switch the sound on again press the
once more or press one of the buttons
10. Playback of DVD, SVCD,
VCD and CD discs

10.1 Inserting the disc

• Open the disc tray of the DVD player by
OPEN/CLOSE
pressing the
"OPEN" will now appear in the display.
• Place a DVD/VCD/S-VCD with the inscribed/
labelled side facing up in the disc tray.
• Close the flap of the disc tray.
"LOAD" will appear in the display.
• The contents of the inserted DVD/VCD/S-VCD
will now be loaded; this may take a few se-
conds.
• Playback of the inserted DVD/VCD/S-VCD starts
automatically.
- 91 -
to exit the setup menu.
o to increase the volume.
a to decrease the volume.
MUTE
VOL+
button.
button
VOL-
or .