Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
8
operation
The device can only be operated via an FDT-frame application in conjunction with a PC. The IO-Link master is ac-
cessed via PC and the combination of FDT-frame application and DTM. You can change between the IO-link Mode
(IOL) and the standard IO Mode (SIO). The specific parameters of the connected IO-Link devices can be accessed
via the DTM.
9
Maintenance
The device is maintenance-free.
10
repair
The device is not intended for repair by the user. If the device should be defective, take it out of service and send
it back to TURCK. Please pay attention to the warranty conditions agreed with delivery.
11
take out of service
Stop the software communication between IO-Link master and IO-Link device.
➤
➤
Stop the software communication between IO-Link master and PC.
➤
➤
Unplug the electrical connection between IO-Link master and IO-Link device.
➤
➤
Unplug the electrical connection between IO-Link master and PC.
➤
➤
Unplug the electrical connection between IO-Link master and the external power supply.
➤
➤
12
Disposal
Dispose of the device in compliance with the Directive 2002/96/WE separately from normal waste.
13
technical data
Type code
Ident no.
IO-Link
Operating mode
Number of IO-Link port
Network
Supply voltage
Connection IO-Link port
Max. load current via IO-Link port
Network connection
Temperature range
Storage temperature
Dimensions
Weight
Housing quality
Protection class
more@turck.com • www.turck.com • 2013/11
USB-2-IOL-0002
6825482
1-channel operation in the IOL or SIO mode
SIO, COM1, COM2, COM3
1
Mini USB-B
24 VDC
M12 x 1 (A-coded)
IO-Link master fed via USB: 80 mA
IO-Link master fed via plug-in power supply: 1.0 A
USB-B
-5...+55 °C
-25...+70 °C
54 x 41 x 24 mm (l x w x h)
approx. 0.096 kg
Al
IP40
Operation
6
Werbung
Inhaltsverzeichnis
