Technical Data And Further Information; Mounting; Electrical Connection - Mettler Toledo M100/2H DR Leitfaden Für Die Einrichtung

2

Technical Data and Further Information

The most important technical data such as supply voltage are given on the name plate on the
transmitter. For further technical data such as accuracy refer to the Operating Instructions. This
document, the Operating Instructions and software are on the supplied CD-ROM. You can also
download the documentation via Internet "www.mt.com/M100".
3

Mounting

The M100 DIN rail transmitter is suitable for 35 mm wide DIN rail systems.
For installation drawings refer to the Operating Instructions.
4

Electrical Connection

h
Note: Power off instrument during electrical connection.
1. Switch off supply voltage.
2. Connect mains supply (14 to 30 V DC) to the terminals 1 and 2.
3. Connect sensor to terminals 5 and 6.
4. Connect analog output and HART signal to terminals 1 and 2.
5. Connect digital input for switching transmitter in Hold state to terminals 3 and 4.
6. Connect analog input signal 4 to 20 mA for pressure compensation to terminals 7
and 8.
For terminal definitions see next page.
en
35