MSI MEG Z490 GODLIKE Kurzanleitung Seite 72

▶ CPU Base Clock Apply Mode [Auto]*
Sets the applying mode for adjusted CPU base clock.
[Auto]
[Next Boot]
[Immediate] CPU runs the adjusted CPU base clock immediately.
▶ Direct OC Button [Enabled]
Enables or disables the base clock buttons for real time overclocking.
▶ Direct OC Step (MHz) [1.00]*
Sets the increase or decrease of BCLK frequency when the base clock button (+ or -)
is pressed each time.
▶ Clockgen Features sub-menu
Press Enter to enter the sub-menu. Sets the detailed clockgen features.
▶ Extreme Memory Profile (XMP) [Disabled]
XMP (Extreme Memory Profile) is the overclocking technology by memory module.
Please enable XMP or select a profile of memory module for overclocking the
memory. This item will be available when the memory modules that support XMP is
installed.
▶ DRAM Reference Clock [Auto]*
Sets the DRAM reference clock. The valid value range depends on the installed CPU.
This item appears when a CPU that supports this adjustment is installed.
▶ DRAM Frequency [Auto]
Sets the DRAM frequency. Please note the overclocking behavior is not guaranteed.
▶ Adjusted DRAM Frequency
Shows the adjusted DRAM frequency. Read-only.
▶ Load Memory Presets [Disabled]*
Load OC Memory Preset will optimize the timing, voltage of installed memory module.
▶ Memory Try It ! [Disabled]
It can improve memory compatibility or performance by choosing optimized memory
preset.
62
UEFI BIOS
This setting will be configured automatically by BIOS.
CPU will run the adjusted CPU base clock next boot.