MSI MEG Z490 GODLIKE Kurzanleitung Seite 66

∙ Smart Button - it provides 4 function modes to be achieved by reset button.
▪ Reset - press the reset button to reset the system.
▪ Mystic Light on/ off - press the reset button to turn on/ off all the onboard LEDs.
⚠
Important
The Mystic Light on/ off function mode is unavailable when the LED_SW1 (EZ LED
Control) switch turns OFF.
▪ Safe Boot - press the reset button to reboot the system and the system will be
forced into BIOS with the previous BIOS settings.
▪ Turbo Fan - press the reset button for all fans to operate full speed or default
speeds.
▪ Configuring Smart Button
1. Click on Smart Button and select a function mode.
2. Press F10 to save the change and select Yes to restart the system.
∙ Language - allows you to select language of BIOS setup.
∙ System information - shows the CPU/ DDR speed, CPU/ MB temperature, MB/ CPU
type, memory size, CPU/ DDR voltage, BIOS version and build date.
∙ Boot device priority bar - you can move the device icons to change the boot priority.
The boot priority from high to low is left to right.
∙ Component Information - click on the CPU, Memory, Storage, Fan Info and Help
buttons to show the information of connected component.
∙ Function buttons - enable or disable these functions by clicking on these buttons.
The function is enabled when the button shows ON .
⚠
Important
The function buttons will vary with the motherboard you purchased.
56
UEFI BIOS