WARNING
Risk of injury by crushing or clamping!
The device has moving components. When adjusting these components, there is a risk
of jamming or crushing parts of the body.
•
Follow the instructions in this manual carefully.
•
Never reach into the area where the components are moving when adjusting the
components.
NOTE
Risk of damage to property!
When clamping the PushBuddy®, there will be strong forces applied.
•
Before use, check that the pipe can withstand these forces.
Adjusting the inspection speed
The PushBuddy® pushes or pulls the rod with a maximum of 50cm/s. The speed for pushing,
pulling back and inspection can be adjusted separately in can3D.
In the Live/ TV Inspection window, click the Settings button (1). Select the tab Inspection
Speed (2) and set the desired speed.
EN
1
2
45
45