Inserting The Rod Into The Pushbuddy - Kummert PushBuddy Bedienungsanleitung

Inserting the rod into the PushBuddy

®
Push the lever upwards. Make sure
that the clamping hooks are no longer
engaged with the pivots and unfold the
movable part of the PushBuddy .
®
Unwind some rod from the reel (see reel
operating instructions) and run it th-
rough the PushBuddy so that the plug
®
exits through the opening at the front.
Take the back part of the rod and place
it behind the roll.
EN
42