Removing An Extension; Connecting Pushbuddy ® With A Base Unit - Kummert PushBuddy Bedienungsanleitung

Removing an extension

Remove the handle from the PushBuddy . To do this, press the button from bottom to top
®
and pull the handle upwards.
Remove the extensions one after the other. Press the button from bottom to top and pull the
extension upwards.
Attach the handle to the PushBuddy . Make sure that the recess on the handle fi ts exactly
®
into the bulge. The pin must snap into the handle.
Connecting PushBuddy with a base unit
®
Profi 3+ or proTab
Click on the connection symbol at the
bottom left of the screen and select the
desired PushBuddy . Click on „Connect".
®
Once the connection is established, the
beep will no longer be audible.
easyTab
Connecting the PushBuddy to easyTab will be possible from version 2.1.
®
EN
40