Work Praparation; Transport To Place Of Operation - Kummert PushBuddy Bedienungsanleitung

WORK PRAPARATION

Transport to place of operation

The PushBuddy and its accessories can
®
be carried to a place of operation or can
be transported together with the base
device using a carrier. In order to do
this, fi rst hang the carrier onto the base
device.
Insert the PushBuddy
To do this, grasp the handle and place
the transport mounting slots at the
bottom of the PushBuddy
of the carrier. Keep holding the handle
with one hand.
Pull out the lock pin with the other
hand and hold it. Then, position the
upper part of the PushBuddy
the PushBuddy slots of the carrier.
®
Release the lock pin. Make sure that
the PushBuddy is securely mounted
®
before you release the handle of the
PushBuddy .
®
36
into the carrier.
®
onto the axis
®
into
®
EN