Installing An Extension - Kummert PushBuddy Bedienungsanleitung

Installing an extension

Remove the handle from the
PushBuddy . To do this, press the
®
button from bottom to top and pull the
handle upwards.
Make sure that the extensions are clean
and dry.
Insert the extension. Make sure that
the recess of the extension recess
fi ts exactly into the indentation of the
Pushbuddy. The pin must snap into
the extension.
Add additional extension if necessary.
Attach the handle to the extension.
Make sure that the recess on the
handle fi ts exactly into the bulge. The
pin must snap into the handle.
EN
39 39