Connecting/Disconnecting - Panasonic CF-VEB343 Bedienungsanleitung

Connecting/Disconnecting

Connecting
CAUTION
Do not connect or disconnect the port replicator while the computer is powered on.
1
Power off the computer, and disconnect all cables from the computer.
2
Connect the plug of the AC adaptor that came
with the computer to the DC-IN jack of the port
replicator and plug the other end into an AC
outlet.
CAUTION
• Be sure to use the AC adaptor. (
battery power.
)
• Do not use other than the specified AC Adaptor (Model No.: CF-AA1527) and AC cord.
• Refer to the "Operating Instructions" provided with the computer for information on proper
handling of the AC adaptor and AC cord.
3
Remove the strap and firmly close the covers of
the headphone, microphone and DC-IN jacks of
the computer.
4
Turn the computer over, and open the cover of the
expansion bus connector of the computer.
The port replicator will not function using the computer's
(3)
(1)
(2)
E
7