Velleman CAMIP5N Bedienungsanleitung Seite 10

• Set the resolution to 320*240 or 640*480.
• Set the mode to 50Hz or 60Hz.
Note: the camera is not suitable for outdoor use! The outdoor setting could be used in case the
camera is pointed towards a bright natural light source.
• Set the brightness and contrast of the image with the "+" and "-" buttons.
For Administrator layout
• The For Administrator layout is only available when logged in with an administrator account. It
is used for advanced configuration of the cameras.
Notes:
• Select the desired camera before opening the For Administrator layout.
• Depending on the ticked checkboxes, different data entry fields are shown. Hence the
display you see for a certain option might differ from the images used below.
Device info
• Device ID, firmware version and Web User Interface version are shown (see image above).
Alias Settings
• Set the name of the selected camera.
Date&Time Settings
• Set date and time data for the camera.
Note: if the timestamp on the display shows the wrong time, try checking the Sync with PC Time
checkbox and press Submit.
13.12.2010
CAMIP5N
10
©Velleman nv