Kongskilde TRL serie Betriebsanleitung Seite 18

Dimensions:
Direct driven blowers
Belt driven blowers
Noise ratings for blowers and fans
The noise measurements were made with a long duct
connected to the blower outlet side, while the blower
operates at maximum conveying capacity, but while no
material was conveyed by the blowers.
Sound power
Blæser
Lwa (dB)
TRL 20 92
TRL 40 92
TRL 55 105
TRL 75 99
TRL 100 101
TRL 150
109
TRL 200
-
TRL 300 107
TRL 500 108
18
Sound pressure in 1
m distance LpA (dB)
83
82
91
85
90
97
-
93
93
Direct driven 50Hz models
mm A B
TRL 20 OK160 630
TRL 40
OK160 759
TRL 55 OK160 759
TRL 75 OK160 759
Direct driven 60Hz models
inch A B
TRL 30 OK160 24.8
TRL 50 OK160 27.8
TRL 100 OK160 29.9
*) Dimensions D and E will vary according to motor
type
Belt driven 50Hz models
mm A B
TRL 100 OK160 1140
TRL 150 OK160 1140
TRL 200 OK160 1140 1000
TRL 300 OK160 1225
TRL 500 OK160 1380 1005
Belt driven 60Hz models
inch A B
TRL 150 OK160 44.9
TRL 200 OK160 44.9
TRL 300 OK160 48.2
TRL 500 OK160 54.3
*) Dimensions D and E will vary according to motor
type
C D E F
672 330 478 127
834 397 557 123
836 412 572 125
826 451 699 115
C D* E* F
27.4 16.1 22.0 5.9
27.4 16.1 22.0 5.9
33.3 17.2 26.9 5.4
C D E F
830 435 695 120
830 435 695 120
435 875 120
930 585 1135 120
290 995 110
C D* E* F
32.7 16.5 26.8 4.7
39.4 16.5 33.9 4.7
36.6 23.0 44.0 4.7
39.6 11.4 39.2 4.3