Remove Tv Stand Procedure; Technical Specifications Chart - Seg Bergamo Bedienungsanleitung

REMOVE TV STAND PROCEDURE

If you want to remove the TV stand from the TV sets, unscrew 2 screws under the stand
RE-INSTALL TV STAND PROCEDURE
If you want to put the TV stand back to the TV set, screw back all the screws in clockwise direction as
shown at
52

TECHNICAL SPECIFICATIONS CHART

Power supply AC: AC 100-240V 50/60 Hz
Program memory Analog: 100
Program memory Digital: 400
RF Aerial input: 75 Ohm (Co-axial)
Loudspeaker impedance: 4 Ohm
Sound systems: NICAM/A2
Batteries: 2xUM - 4, IEC R03 or AAA 1.5V
Broadcasting systems received: PAL (B/G, D/K, I)
SECAM (B/G, D/K, L)
DVB-T
DVD
53