INSTALLATION
STAND INSTALLATION
(1) Keep the TV stand when installing.
(2) Don't set the TV set on shelves, carpets, beds, or closets.
(3) Don't cover the TV with curtain or paper.
(4) Avoid the following methods:
QUICK GUIDE
First Time Installation
With the LCD MENU button you can get back to the language selection menu.
Mit der LCD MENU Taste können Sie ins Sprachauswahlmenü zurück gelangen.
Press LCD MENU button. Then press once the
First Time Installation, then press ENTER button or
password '0000' in the dialogue box to continue.
Note: Input of password will only be necessary if the option Lock System in LOCK menu is set to On
(see page 27).
Use
/
to select to OSD language
then press ENTER button to confirm.
Use
/
to select to country you are
lining then press ENTER button to confirm.
English
Deutsch
Enter
button to choose SETUP, then use
/
to select
button to enter submenu. Input the default
Press
/
button to select decided
picture mode
(Home mode/Dynamic/Standard/
Mild/Personal).
If you select any mode other than
Home mode,
a menu will appears. Press
button
to confirm or press
button to cancel.
It will leave
Home Mode.
Yes
No
12
INSTALLATION
The TV will search all available channels in ATV and DTV automatically.
MHz
QUICK QUIDE
Change the language setting
1 . Press the LCD MENU button of the remote control, Press once the
SETUP.
2. Press
/
button to choose the option OSD Language. Then press OK/ENTER
button to enter the submenu.
3. Press
/
or
/
button.
Repeat First Time Installation routine
1. Press LCD MENU button of the remote control, Press once the
SETUP.
2. Afterwards, choose the option ''First Time Installation" using the
3. Follow the instructions given under First Time Installation.
NOTE: There are no markers. Mark the desired options.
IMPORTANT BUTTONS
MUTE
Disable or enable Sound output
LCD MENU
Open the menu
EXIT
Leave menu EPG or TELETEXT or OSD menu
INPUT
Choose signal source
ATV-DTV-Media-AV-DVD-PC-Component-SCART-HDMI
TV: analogue TV (cable TV)
ENTER
ASPECT
Change the aspect ratio
NOTE:
Please make sure that DVB-T coverage is available for your area. DVB-T radio in particular is very
limited and not available in most locations.
Depending on your region and building structure, a stronger antenna might be necessary in order to
receive DVB-T stations. Metal buildings and the geographic location of the transponder may have a
strong effect on the available signal strength. Please note that this is not a device defect, but particu-
larities of the reception of DVB-T.
Appropriate antennas may be obtained from your local electronics dealer.
button to choose
OK/ENTER
button to choose
/
button.
DVB-T: DVB-T
13