Herunterladen Inhalt Inhalt Diese Seite drucken

Installation Diagram Of Indoor And Outdoor Units; Optional Installation Parts - Toshiba RAS-B10N3KVP Serie Handbuch

Vorschau ausblenden Andere Handbücher für RAS-B10N3KVP Serie:
Inhaltsverzeichnis

Werbung

Verfügbare Sprachen
  • DE

Verfügbare Sprachen

  • DEUTSCH, seite 35

INSTALLATION DIAGRAM OF INDOOR AND OUTDOOR UNITS

INSTALLATION DIAGRAM OF INDOOR AND OUTDOOR UNITS
5
Filter
3
Batteries
2
Wireless remote control
Remark :
• Detail of accessory and installation parts can
see in the accessory sheet.
• Some pictures might be different from the
actual parts.

Optional Installation Parts

Part
Parts name
code
Refrigerant piping
Liquid side
: Ø6.35 mm
Gas side
: Ø9.52 mm
A
(B10, B13N3KVP Series)
: Ø12.7 mm
(B16N3KVP Series)
Pipe insulating material
B
(polyethylene foam, 6 mm thick)
C
Putty, PVC tapes
6
Filter
8
Flat head
4
Remote control holder
wood screw
Vinyl tape
Apply after carrying
out a drainage test.
Q'ty
One
each
1
One
each
Hook
1
Installation
plate
Shield pipe
Saddle
Extension
drain hose
(Not available,
provided by installer)
Fixing bolt arrangement of outdoor unit
• Secure the outdoor unit with À xing bolts and nuts if the unit is likely to be
exposed to a strong wind.
• Use Ø8 mm or Ø10 mm anchor bolts and nuts.
• If it is necessary to drain the defrost water, attach drain nipple 9 and cap
water proof ! to the bottom plate of the outdoor unit before installing it.
125 mm
29 mm
108 mm
Ø25 mm
Air outlet
600 mm
When using a multi-system outdoor unit is used, refer to the installation
manual provided with the model concerned.
3
For the rear left and left piping
Wall
Insert the cushion between the indoor
unit and wall, and tilt the indoor unit for
better operation.
Do not allow the drain hose to get slack.
Cut the piping
hole sloped
slightly.
Make sure to run the drain hose sloped
downward.
The auxiliary piping can be connected to
the left, rear left, rear right, right, bottom
right or bottom left.
Right
Rear
right
Bottom
Rear
right
left
Bottom left
Insulate the refrigerant pipes separately
with insulation, not together.
6 mm thick heat resisting
polyethylene foam
Air inlet
* Drain nipple and
cap water proof are
packed in outdoor
unit.
99 mm
Drain outlet
EN
ES
FR
IT
DE
PT
PL
CZ
RU
CR
Left
HU
TR
NL
GR
SV
FI
NO
DK
RO
BG
EE
LV
SK
SI

Werbung

Inhaltsverzeichnis
loading

Inhaltsverzeichnis