Using The Washing Machine - Philips HQ9190CC2 Bedienungsanleitung

Downloaded from www.Manualslib.com

using the washing machine

1 Place the shaver in the holder and push the
lever down completely to lock the shaver into
place.
The charging light on the washing machine starts
blinking to indicate that the shaver is being charged.
2 Press the start button to start the cleaning
program.
The cleaning light starts blinking and the shaver is
automatically lowered into the cleaning fluid.
During the cleaning program, which takes
,
approx. 1 hour, the cleaning light blinks
continuously.
During the first phase of the cleaning program,
,
the shaver automatically switches on and off
several times and is put in different positions.
During the second phase of the cleaning
,
program, the shaver is placed in the drying
position. It stays in this position until the end of
the program. The cleaning light starts burning
continuously.
After the cleaning program, the shaver
,
automatically returns to its starting position and
the charging program is started. The charging
light starts blinking.
Note: If you press the start button or open the lever
during cleaning, the cleaning program is aborted and
reset. In this case, the cleaning light stops blinking and
the holder returns to its starting position.
Note: If the powerplug is removed from the wall socket
during cleaning, the cleaning program is aborted. The
holder will remain in its current position. When the
powerplug is put back into the wall socket, the holder
will move to the highest position.
manuals search engine
EnglisH
13