Cleaning The Washing Machine - Philips HQ9190CC Bedienungsanleitung

After the cleaning program, the shaver
,
automatically returns to its starting position and
the charging program is started. The charging
light starts blinking.
Note:If you press the start button or open the lever
during cleaning, the cleaning program is aborted and
reset. In this case, the cleaning light stops blinking and
the holder returns to its starting position.
Note:If the powerplug is removed from the wall socket
during cleaning, the cleaning program is aborted. The
holder will remain in its current position. When the
powerplug is put back into the wall socket, the holder
will move to the highest position.
Note:If the fluid volume in the cleaning chamber
drops below the minimum level during the cleaning
program, the program is aborted.The cleaning light
starts to blink with intervals and the holder returns to
its starting position.

Cleaning the washing machine

The cleaning chamber is not dishwasher-proof.
,
Clean the cleaning chamber every two weeks.
,
1 Simultaneously press the buttons on both sides
of the washing machine (1) and lift the washing
machine off the cleaning chamber (2).
The cleaning chamber remains behind.
2 Pour any remaining cleaning fluid out of the
cleaning chamber.
The cleaning fluid can simply be poured down the
sink.
EnglisH
13