Mains Part Plug; Usage; 7�1 Adjusting The Volume; 7�2 Adjusting The Brightness - Beurer BY 110 Gebrauchsanweisung

4� To switch on the parent unit, press and hold the ON/OFF button
top for approx� 3 seconds� If the camera is already switched on, the trans-
mission image from the camera will automatically appear on the screen� If
the camera is still switched off, an acoustic signal is emitted and
pears on the display�
6.4 Initial use of parent unit with mains part plug
1� Connect the small end of the parent mains part plug with the parent unit�
Insert the other end of the parent mains part plug into a suitable socket�
2� To switch on the parent unit, press and hold the ON/OFF button
top for approx� 3 seconds� If the camera is already switched on, the trans-
mission image from the camera will automatically appear on the screen� If
the camera is still switched off, an acoustic signal is emitted and the fol-
lowing symbol appears on the display:

7. Usage

7.1 Adjusting the volume
The parent unit has 5 volume levels�
• To adjust the volume, press the ( – ) or ( + ) button on the side�
7.2 Adjusting the brightness
The parent unit has 5 brightness levels�
• To adjust the brightness, press the (
7.3 Intercom function
The parent unit has an intercom function�
To activate the intercom function, hold down the (
ent unit and speak into the unit� The words you have spoken can now be
heard on the camera� To deactivate the intercom function, release the (
button again�
7.4 Settings menu
You can adjust the following settings in the menu of the parent unit: zoom
function, lullabies, timer, add/delete camera, select camera, noise sensi-
tivity, frequency, energy-saving mode, temperature unit and temperature
alarm, movement alarm and resetting to factory settings.
) or ( ) button�
34
on the
on the
) button on the par-
ap-
)