Targus ACP50EU Handbuch Seite 17

• Disconnect all devices from the docking station and
• Each USB port is equipped with over-current
Verifying Devices are Installed
You can view the devices installed on the docking station
from the Device Manager window in System Properties.
Right-click My Computer, Properties, then click the
Hardware tab, and then the Device Manager button.
From the Device Manager window, expand the following:
• Display Adapters — displays Targus USB 2.0 VGA
• Human Interface Devices — displays keyboards and
• Network Adapters — displays ADM851X USB to fast
• Ports (COM & LPT) — Serial on USB [COM x]
• Sound, Video and Game Controllers — displays USB
• Universal Serial Bus controllers — displays the other
Downloaded from www.Manualslib.com
Targus Mobile Docking Station with Video
reconnect them, one at a time. Check that each device
works before plugging in the next one.
protection. Should a USB device draw more current
than the USB port can supply, the port will shut down.
To re-enable the port, unplug the device and go to
Device Manager or to the message in the system tray
and choose the Reset option. You can then plug the
device back into the USB port. If a shut down reoccurs,
check the power requirements of the device.
dock device
pointing devices: mice, trackballs, and joysticks
ethernet adapter
audio device
devices installed for the docking station and generic
hub.
manuals search engine
17