Targus ACP50EU Handbuch Seite 12

Connecting a Serial Mouse
To connect a serial mouse, attach the cable connector to
the serial port on the docking station.
Connecting
Modem
To connect a serial modem:
1 Attach the cable connector to the serial port on the
2 Install the modem software driver according to the
3 When prompted to select the port, choose the Serial
Connecting a PDA
1 Attach the cable connector to the serial port on the
2 Verify that the COM port setting, in either your
Connecting to a Local Area Network
To connect an ethernet cable with RJ-45 connect, attach
the cable connector to the ethernet/network port on the
docking station. Additional procedures to connect to an
actual network depend on the type of network you are
using. Contact your network administrator for detailed
instructions.
Downloaded from www.Manualslib.com
Targus Mobile Docking Station with Video
and
docking station.
instructions that come with the device.
USB (COMx), where x is the COM port number
assigned by your operating system.
docking station.
®
HotSync or ActiveSync
setting on the docking station.
To verify the COM port setting on the docking station,
refer to "Verifying Devices are Installed" on page 17.
To verify the COM port setting on your PDA, refer to the
documentation that came with it.
manuals search engine
Configuring
®
software, matches the
12
a Serial