roco Sounddecoder Betriebsanleitung Seite 13

4. Press the knob.
5. Turn the knob to the menu option ("Databank").
6. Press the knob.
7. Choose one of the two universal numbers with
the knob (we recommend starting with 36330)
8. Press the knob
Setting the Correct Address:
1. Press the ESC button
2. Move to menu option (Change Locomotive")
with the knob
3. Press the knob.
4. Choose menu option ("Address")
5. Press the knob.
6. Choose the address of the locomotive
7. Press the knob.
In the case that the locomotive does not run, erase
the locomotive from the databank:
1. Press the ESC button
2. Choose the menu option (Erase Locomotive)
3. Press the knob
4. Press the knob again to confirm
Repeat the steps
Repeat the steps "Dock the Locomotive in the data-
bank" (1-8) and "Setting the Correct Address" (1-7)
Should there still be problems, delete the locomoti-
ve from the databank again.
Repeat the steps
"Dock the Locomotive in the databank" (1-8),
except that at step 5 you go to the menu option
("Address"), and at step 7 you should set the
address of your locomotive.
Look for the desired symbol with the knob, and
confirm your choice with the knob.
The functions F1 – F4 can be accessed with the
4 left side buttons on the Mobile Station. The top
button is for function F1. However, the activated
functions cannot be shown in the display.
Technical Help and Support
If you are not able to solve your particular prob-
lem, you should first consult the dealer where you
bought your decoder or your ROCO locomotive.
There you should find experienced help for all ques-
tions about your model railway.
"Märklin" is the registered trademark of the Gebr. Märklin & Cie.
GmbH, Göppinge
"Motorola" is the registered trademark of the Motoro la Inc., Tempe-
Phoenix (Arizona/USA)
GB
13