Change Of The Hinge Position - Pkm GK212.4 A++N Bedienungsanleitung

4. Check that the appliance and the power cord are not damaged.
5. Install the appliance in a dry and well-ventilated place.
6. Protect the appliance from direct sunlight.
7. The doors must open completely and without hindrance.
8. Install the appliance on a level, dry and solid floor. Check the correct installation
with a bubble level.
9. Connect the appliance to the mains properly.
10. The nameplate is inside the appliance or at the back.
Levelling
1. Use the adjustable feet at the front to level the appliance properly.
2. When the appliance is not levelled, the door and the magnetic seals will not
close properly.

Change of the hinge position

WARNING! Switch off and unplug the appliance before changing the hinge
position. RISK OF ELECTRIC SHOCK!
CAUTION! The change of the hinge position must be carried out by at least
two persons; otherwise you may hurt yourself or damage the appliance. Do not tilt
the appliance more than 45
 Tools required: cross-head screwdriver, flat-head screwdriver, hexagonal
spanner.
Heben Sie die Türen immer vorsichtig ab. Verwahren Sie die Türen an einem Ort,
an dem sie nicht beschädigt werden können.
1. Remove the top hinge cover..
2. Unscrew the screws of the top hinge (flat-
head screwdriver).
0
.
28