Using The Working Platforms; Folding The Ladder Together; Repair, Maintenance And Storage; Cleaning And Care - Parkside HG01091 Montage-, Bedienungs- Und Sicherheitshinweise

Using the working
platforms
D o not use the ladder without a work-
ing platform ,
6
carrying out an activity that requires
a working platform
Do not use a working platform
for ladder positions that are not de-
signed to have working platforms fit-
ted (see Fig. A, C). Failure to observe
this advice when using the product
can lead to severe injury and / or
damage to the product.
U se the supplied working platforms
only.
7
U se the working platforms
with the antislip profile
wards (see Fig. I).
H ook the lip
13
working platforms
rung of the ladder section and check
that the other end of the working plat-
form , also rests on a rung in a
6 7
similar manner. The safety hooks
prevent the working platforms
from sliding out of position. If neces-
sary press the working platform lightly
downwards to ensure the working
platform , rests correctly on the
6 7
ladder.
C heck that the working platform
rests correctly on the ladder before you
step on or load the working platform.
W hen using the product on a substrate
with different levels (e.g. steps), ensure
that the working platform
horizontal. Do not attempt to bring
48 GB/MT
when you are
7
, (see Fig. B).
6 7
6
, only
6 7
facing up-
15
on the end of the
, over the last
6 7
,
6
6
, is
6 7
the working platform to the horizon-
tal by placing an object beneath it.
C heck before stepping on to a work-
ing platform
pery. Check that there are no objects
on the working platform
could give rise to a trip or slip hazard.
,
7

Folding the ladder together

F old the ladder together as shown
in Fig. J.
,
6
Repair, maintenance
and storage
repaired only by qualified specialist
personnel using original manufac-
turer parts only. This will ensure that
the product remains safe to use.
W hen not using it, store the ladder
in a safe, dry place.
14
7

Cleaning and care

C lean the ladder after every use.
T o do so, use a slightly damp, lint-free
cloth.
,
7
I f it is very contaminated, use a slightly
damp cloth and, if necessary, a mild
detergent.
O n no account should you use cor-
rosive or aggressive cleaning agents.
C arefully dry the product off after
cleaning it.
, that it is not slip-
6 7
,
6 7
Have your device
that