Operation; Spare Parts - Hansgrohe Axor Steel Montageanleitung

Large differences in pressure between the hot and
cold water supply should be balanced.

Operation

The mixer is actuated by lifting the lever head.
Swivel to the left = hot water,
swivel to the right = cold water.
Technical Data
This mixer series-produced with waterdimmer
(flow limiter)
Rate of flow with waterdimmer:
Rate of flow without waterdimmer:14 l/min 3 bars
Operating pressure:
Recommended operating pressure:1 - 5 bars
Test pressure:
Hot water temperature:
Recommended hot water temp.:
The aerator is not equal to DIN EN 246
Hansgrohe single lever mixers can be used togeth-
er with hydraulically and thermically controlled
continuous flow heaters if the flow pressure is at
least 1.5 bars.
If the continuous flow heater makes any problems
or there comes not enough water, the waterdim-
mer (6a) located behind the mousseur must be
removed.
To adjust the hot water limiter on single lever mix-
ers, please see page 16.
No adjustment is necessary when using a continu-
ous flow water heater.
English
7 l/min 3 bars
max. 10 bars
16 bars
max. 80° C
65° C

Spare parts

1 handle
1.1 screw cover
2 flange
3 nut
4 cartridge, assy
5 locking screw
6 aerator cpl.
7 pop up rod
8 fixation set
9 connection hose 450 mm
10 spout cpl.
11 aerator cpl.
Special accessories
X special tool set
(not part of delivery)
35093800
96681000
96682800
96690000
92730000
96059000
96683800
96657800
13961000
95001000
97516800
96684800
58085000
9