Miro TD271 Handbuch Seite 13

T
ROUBLESHOOTING
Double (split) screen image.
ü
Make sure your graphics card is set to Non-Interlaced mode.
Entire screen image rolls (scrolls) vertically.
ü
Make sure the input signals are within the LCD monitor's specified
frequency range.
(Maximum: VESA, MAC 1280 x 1024 @75Hz)
ü
Connect the video cable securely.
ü
Try the miro Monitor with another power source.
Control buttons do not work.
ü
Press only one button at a time.
ABOUT THE LCD
The LCD contains over 3,932,160 thin-film transistors (TFTs).
A small number of missing, discolored, or lighted dots on the screen is
an intrinsic characteristic of TFT LCD technology and is not an LCD
defect.
If you display a fixed pattern for more than 10 hours, its image may
remain on the screen in overlap mode when you display something
else.
16 17