Timer; Direct Functions; Switching Off; Cleaning And Maintenance - CASO DESIGN TC 2100 Thermo Control Original Bedienungsanleitung

15.4.4

Timer

 Timer Function. Press the button Timer 2. With the +/- keys, you can now select the
operating time in 1-minute intervals (up to max. 180 minutes). Once the time is up, an
acoustic signal sounds and the device automatically goes into standby mode.
Please note
► During timer operation, you can change the duration at any time with the +/- keys. With
the memory function of the device, the power stage or temperature settings remain
unchanged here.
15.4.5

Direct functions

Switch on the device with On/Standby and choose with button fucntion the desired direct
function. The corresponding lamp will light up.
Preset Direct functions
Direct function
Heat I
Heat II
Boil
Fry
With button 2 timer you can select the operating time with the +/- keys.
15.4.6

Switching Off

When you switch off the device via "On/Standby" and the temperature of the cooker plate
surface is lower than 50°C, the display shows „L". When the temperature of the cooker
plate surface is over 50 °C, it is displaying „H".
► Do not place any empty cookware on the ceramic field. Heating an empty pot or pan
activates the overheating protection and the device turns off.
► Do not operate the device if it is damaged in any way or does not function properly.
► The use of accessories and spare parts not recommended by the manufacturer may
lead to damage on the device and injuries.

16 Cleaning and Maintenance

This chapter provides you with important notices with regard to cleaning and maintaining
the device. Please observe the notices to prevent damages due to cleaning the device
incorrectly and to ensure trouble-free operation.
Please note
Setting
Level 1
Level 2
Level 8
Level 10
43