Renogy R-PB006 Bedienungsanleitung Seite 7

FLASHLIGHT BUTTON
Press the flashlight button to switch lighting modes: Bright (100% brightness),
Bright (50% brightness), Dim (25% brightness), Strobe, and Off.
OPERATIONS
Use the Micro USB cable to connect the portable AC charger to your device and
charging will start automatically.If your device does not begin charging, press the
Power Button to restart the charger.
Press and hold the Power Button to turn on the AC output. The AC output will
shut off automatically when no connection is made after it is turned on for 1
minute.
Press the Power Button once to check the current battery level.
Use a 19V/1.6A (Max) adapter to charge the portable AC charger.
Note: when battery is low and the output power is higher than input power, the
portable AC charger will stop working.
WARNINGS
It is normal for the portable AC charger to become slightly warm during charging
/ discharging.
Keep away from heat sources and liquids.
Please do not dismantle this product.
Fully charge the portable AC charger at least once every 6 months.
- 5 -