Troubleshooting - CANGAROO Easy Check Manuelle Bedienungsanleitung

4. Product weight (with batteries): 67 gr.
5. Display temperature resolution: 0.1°C (0.1°F)
6. Measuring range:
„BODY" mode : 32°C – 42.9°C (89.6°F – 109.2°F)
„Surface temperature" mode : 0°C – 60°C (32 °F - 140 °F)
„Room" mode : 0°C - 40°C (32 °F - 104 °F)
7. Precision
32.0 °C - 34.9 °C (89.6 °F – 94.8 °F)
35.0 °C - 42.0 °C (95 °F – 107.6 °F)
42.1 °C - 42.9 °C (107.8 °F – 109.2 °F)
8. Power: ≤300mW
9. Accuracy: ± 0.3 (0.6
°C
10. Measuring distance: 3cm – 5cm (1.2in – 2in)
11. Automatically turning off:
12. Memory: 32 measurements
• Note: Contactless infrared thermometer, model Easy Check, item number JXB-183 can take temperature readings under
32°C and over 42,9°C (89,6°F до 109,2°F), but the precision is not guaranteed out of this range.
 Durability of the product
Easy Check is made for intensive and professional usage, its durability is guaranteed for 100 000 measurements.
1. Safety glass over the lens is easily broken part from the thermometer, please, be careful with it.
2. Clean the glass with cotton towel, lightly moisture with 95° alcohol.
3. Do not expose the thermometer on sunlight or water. Their influence will damage the product.
4. Clean the whole device with soft cloth. Do not wash it under running water! Do not use aggressive cleaning detergents, as
bleach, those with abrasive particles or on alcohol basis. 5. If you will not use the device for long time, take the batteries out,
to avoid leaking or corrosion.
6. Do not storage the device on high or low temperatures or high humidity (look technical characteristics), on direct sunlight,
close to direct heating sources or dusty places. Otherwise measurement deviations can be caused.
• Manual 1 pcs.
• AAA alkaline batteries
• Storage case 1 pcs.
This device corresponds to the European directive 93/42/ЕЕС, related to medical products, ISO 80601-2-56 and European
standard EN60601-1-2 and it is object of concrete safety equipment, regarding electromagnetic compatibility.
If you have problems, while using the thermometer, please, take a look at the guidelines in this manual for solving the
problem. If the problem still exists, contact with the trade agent, which you bought the product from.
1. Display shows temperature, higher than 42,9 °C (109,2 °F)
The temperature is in Fahrenheit. Change the measurement to Celsius.
2. Display shows temperature lower than 32 °C (89,6 °F)
For measuring the surface temperature, press button "BODY" and set for measurement on „BODY". If the device is in mode
„Surface temperature" , the temperature 32 °C (89,6 °F), which display will show, taking into account the external body
temperature, instead internal.
3. Display show the message "Hi"
When using contactless thermometer, model Easy Check, the message "Hi" can show on the
display. In this case the temperature is either over the chosen range or over 42,9 °C (109,2
°F) in„BODY" mode.
4. Display shows message "Lо"
When using the contactless thermometer, model Easy Check, the message "Lo" can show on
the display. In this case, recorded temperature is either under chosen rage or under 32 °C
(89,6 °F) in „BODY" mode.
± 0.3 (± 0.6
°C
± 0.2 (± 0.4
°C
± 0.3 (± 0.6
°C
°F)
≤30 secs
PRODUCT MAINTENANCE
2 pcs.

TROUBLESHOOTING

°F)
°F)
°F)
ACCESSORIES
GUIDELINES
18