Empfehlungen Und Hinweise Für Sichere Verwendung - CANGAROO Easy Check Manuelle Bedienungsanleitung

Immunity test IEC 60601 level test
NOTE 1: For 80 MHz and 800 MHz is applicable the highest frequency range.
NOTE 2: These guidelines may not apply in all situations. Electromagnetic multiplication is not influenced by absorption and
reflection from structure, objects and people.
The strength of the field from stationary transmitters, as main situations for radio (cellular/wireless)
telephones and terrestrial mobile radios, amateur radio, АМ and FM broadcasting and TV broadcasting,
theoretically it can not be provided with accuracy. To evaluate the electromagnetic environment,
because of fixed radiofrequency transmitters, it have to be provided survey of electromagnetic objects.
а
If the measured power of the field, on which JXB-183 is used, increases the applicable compliance level
b
At frequency, higher than the range 150 KHz to 80 MHz, the strength of the field must be less than 3 V/m.
Recommended distances for separating between portable and mobile RF equipment and the medical "JXB-183"
"JXB-183" is intended for using in electromagnetic field, in which the emitted RF interruptions are controlled. The client or
user of the medical "JXB-183" can help for preventing the electromagnetic interruptions, as it keeps to the minimal distances
between portable and mobile RF communication equipment (transmitters) and "JXB-183" , as the recommended below,
The calculated
maximum output
power of the
transmitter
0,01
0,1
1
10
For transmitters, calculated with maximal output power, which are not recorded above, the recommended separating
distances d in meters (m) can be predicted, using the equal, applicable to the transmitter's frequency, where P is the
maximum output power, measured in vats (W), according to the manufacturer's transmitter.
NOTE 1: For 80 MHz and 800 MHz, the separating distance for the higher frequency range applies. NOTE 2: This guideline
may not apply in all situations. The electromagnetic multiplication is influenced by absorption from structures, objects and
Address: 38 Huanzhen Xi Road Dagang Town, Nansha, Guangzhou, China
DER HERSTELLER BEHÄLT SICH DAS RECHT VOR, DIE PRODUKTSPEZIFIKATIONEN OHNE WARNUNG ZU
ÄNDERN!
WICHTIG! LESEN SIE SORGFÄLTIG UND BEHALTEN SIE FÜR ZUKÜNFTIGE REFERENZEN!
EMPFEHLUNGEN UND HINWEISE FÜR SICHERE VERWENDUNG
- Befolgen Sie die in der Anleitung beschriebenen Wartungshinweise.
- Das Gerät darf für den professionellen oder persönlichen Gebrauch verwendet werden.
- Das Gerät muss für die in diesem Handbuch beschriebenen Zwecke verwendet werden.
- Dieses Gerät soll nur in einem Umgebungstemperaturbereich von 10 bis 40 Grad verwendet werden.
- Das Gerät ist nicht für Verwendung von Kindern geeignet. Medizinprodukte sind kein Spielzeug!
Compliance level
must be monitored, to check the normal working. If observed
abnormal performance, additional measures must be taken,
according maximal power of the communication equipment.
Separation distance, according the frequency of transmitter.
150 KHz to 80 MHz
d = [ 3,5/V1] VP
/
/
/
/
Produced for CANGAROO in China
Manufacturer: Guangzhou Jinxinbao Electronic Co., Ltd.
Importer: Moni Trade ltd.
Address: Bulgaria, Sofia, Trebich quarter, ul. Dolo 1
Tel.: 02/ 936 07 90
Electromagnetic environment- guidelines
with RF above, medical JXB-183
as reorientation or moving of JXB-183.
80 MHz to 800 MHz
d = [ 3,5/E1 ] VP
0,12
0,38
1,2
3,8
people.
DE
800 MHz to 2,5 GHz
d = [ 7/E1 ] VP
0,23
0,73
2,3
7,3
21