Specifications - Echo DCS-2500T Bedienungsanleitung

Specifications

Mass:
without battery, guide bar, saw chain and chain oil
with battery, guide bar, saw chain and chain oil
External Dimensions: length × width × height
(with battery)
Volume:
Tank for chain lubrication oil
Oil (Chain oil)
Cutting length:
All specified usable cutting lengths of guide bar
Chain:
Specified pitch
Specified gauge (thickness of drive links)
Type of guide bar
Guide bar gauge
Type of chain
Chain speed at maximum motor speed
Lubrication
Sprocket: Specified number of teeth
Battery:
Type
Pack voltage
Charger type
Charger input voltage
Charger Lights:
Charge Time:
Sound Pressure Level: (EN60745-2-13)
Sound Power Level: (EN60745-2-13)
Uncertainty
Vibration levels: (EN60745-2-13)
Front handle
Rear handle
Uncertainty: K
These specifications are subject to change without notice.
 The declared vibration total value has been measured in accordance with a standard test method and may be used for com-
paring one tool with another.
 The declared vibration total value may also be used in a preliminary assessment of exposure.
DCS-2500T
kg 1.6
kg 3.1
mm 259 × 188 × 209
mL 120
Special chain oil or motor oil
mm 200, 250
mm 9.53 (3/8 inch)
mm 1.27 (0.050 inch)
cm 25 (ECHO)
mm 1.27 (0.050 inch)
Oregon 91PX
m/s 19.0
mm Automatic oil pump
6
Li-Ion
V 56 (rated 50.4)
CCCV
V AC 220 - 240
Red LED – Battery is outside charging temperature
range
Red LED Blinking – Fault
Green LED – Battery finished charging
Green LED Blinking – Battery is charging normally
Approximately 42 minutes.
dB(A) 89
dB(A) 101
dB(A) 3
m/s² 3.3
m/s² 4.3
m/s² 1.5
36
6.35 (1/4 inch)
1.09 (0.043 inch)
20, 25 (ECHO)
1.09 (0.043 inch)
SUGIHARA A4S
17.0
8