Riello RG3 Montage- Und Bedienungsanleitung Seite 38

Declaration of conformity in accordance with ISO / IEC 17050-1
Manufacturer:
Address:
Product:
Model:
These products are in compliance with the following Technical Standards:
EN 267
EN 12100
and according to the European Directives:
BED
MD
LVD
EMC
The quality is guaranteed by a quality and management system certified in accordance with UNI EN ISO 9001.
Declaration of Conformity A.R. 8/1/2004 & 17/7/2009 – Belgium
Manufacturer:
Distributed by:
It is hereby certified that the apparatuses specified below conform with the model of the type described n the CE conformity dec-
laration and they are produced and placed in circulation in conformity with the provisions defined in L.D. dated January 8, 2004 and
July 17, 2009.
Type of product:
Model:
Regulation applied:
Values measured:
Legnago, 01.12.2015
1915
RIELLO S.p.A.
Via Pilade Riello, 7
37045 Legnago (VR)
Light oil burners
RG3 - RG3 TL
92/42/EEC
2006/42/EC
2014/35/UE
2014/30/UE
RIELLO S.p.A.
37045 Legnago (VR) Italy
Tel. ++39.0442630111
www.rielloburners.com
RIELLO NV
Ninovesteenweg 198
9320 Erembodegem
Tel. (053) 769 030
Fax. (053) 789 440
e-mail. info@riello.be
URL. www.riello.be
Light oil burners
RG3 - RG3 TL
EN 267 and A.R. dated January 8, 2004 - July 17, 2009
CO max: 4 mg/kWh
NOx max: 140 mg/kWh
Executive General Manager
RIELLO S.p.A. - Burner Department
Mr. U. Ferretti
GB
Efficiency Directive
Machine Directive
Low Voltage Directive
Electromagnetic Compatibility
Research & Development Director
RIELLO S.p.A. - Burner Department
Mr. F. Comencini