Herunterladen Inhalt Inhalt Diese Seite drucken

Cardin Elettronica ZVL548.00 Handbuch Seite 28

Digitale funksteuerung mit lcd-display und 3g/wf-funktion
Inhaltsverzeichnis

Werbung

Verfügbare Sprachen
  • DE

Verfügbare Sprachen

  • DEUTSCH, seite 47
• NEW: starts up the memorization procedure for a new number in the address book that will be automati-
cally added by direct dialling the receiver from the appliance you wish to enable.
Memorization is only possible if memory locations in the address book are still available. Press
activate the procedure which can be interrupted at any moment by pressing the
required to memorise a new number are:
1. Start up the process by pressing
2. Dial the receiver using the appliance you wish to memorise; as soon as the number is identified the
call will be terminated. If the number is already stored in memory an error message will appear for a few
seconds, after which the procedure will be restarted from the beginning.
3. The entire number is shown on the display. Press
functions to be associated with the number or press
4. Using the
letters "A/B/C/D" identify the receiver channel, while the letter "R" (Remote) means the number can only
be used for remote access. Press
5. To complete the procedure and save the number in the address book one more confirmation must be
given by pressing the
6. The number will be saved in the address book in the next available memory location and will be
confirmed by 'MEMORISED' appearing on the display. After two seconds has elapsed 'NEW' will once
again appear on the display
• REMOVE: allows you to display and if needed cancel telephone numbers from the SIM address book.
Press
to activate the procedure which can be interrupted at any moment by pressing the
ENT
The operations required to cancel a number are:
1. Start the procedure by pressing
2. The first memorised number is looked up in the address book, starting in order from the first memory
location and then shown on the display. This operation can take a certain amount of time depending on
the size and occupation of the database. If you press
you will be returned to the 'REMOVE' menu. If the address book is empty the acronym 'EMPTY' will be
shown on the display and you will be returned to the 'REMOVE' menu automatically.
3. The identification number is shown on the display while waiting for the user to make a choice. Using
the
buttons you carry on the search from point 2, pressing
cancelled. Press
ESC
4. To complete the procedure and cancel the number one more confirmation must be given by pressing
the
button. Cancellation will be confirmed by the message "DELETED!" appearing on the display for
two seconds after which will be taken by to point 2.
MENU: PIN SIM (only with a 2G/3G card)
This menu allows you to memorise the PIN of the telephone SIM into the user code memory so that the
receiver can use it whenever it is requested by the SIM. If the PIN is absent the modem cannot be started up.
To modify the value go to the PIN SIM menu and select
given the value '0000' as a starting point. Using the
the number until the desired value appears on the display.
Keeping the button pressed down will force it to scroll quickly in units of +/-20. Pressing the
confirm the value which will be saved in memory (the modem will restart so it can be used). Pressing
will quit the procedure and take you back to the PIN SIM, menu without modifying the memory content.
If a PUK code is requested, indicated by the acronym "[ERR]" appearing on the display you will need to
transfer the SIM into a standard telephone in order to carry out the necessary operations. You are advised
to always insert the SIM's PIN code into the receiver.
, 'CALL' will appear on the display.
ENT
buttons scroll through the functions that can be associated with the number. The
to accept the setting or press
ENT
button. Press
ESC
.
ENT
to cancel the procedure and return to the menu "REMOVE"
to accept the number and then select the
ENT
to terminate the procedure.
ESC
to cancel the procedure.
the search function will be interrupted and
ESC
. The current PIN is not visible and you will
ENT
(increasing/decreasing in steps of 1 unit) modify
28
key. The operations
ESC
to terminate the procedure.
ESC
will select the number to be
ENT
ENT
to
ENT
key.
ESC
button will
ESC

Werbung

Inhaltsverzeichnis
loading

Inhaltsverzeichnis