1
Introduction
h
Intended Use
4
Note: The Quick Setup Guide is a brief operating instruction.
The M400 PA transmitter must only be installed, connected, commissioned, and
maintained by qualified specialists e.g. electrical technicians in full compliance with
the instructions in this Quick Setup Guide, the applicable norms and legal regula-
tions.
The specialist must have read and understood this Quick Setup Guide and must
follow the instructions it contains. If you are unclear on anything in this Quick Setup
Guide, you must read the Operation Manual (supplied on CD-ROM).
The Operation Manual provides detailed information on the device.
The M400 PA transmitter should be operated only by personnel familiar with the
transmitter and who are qualified for such work.
The M400 PA multi-parameter transmitter is a single channel online process instru-
ment with PROFIBUS
®
of fluids and gases. The transmitter is able to measure following parameters:
pH/ORP, Oxygen, Dissolved Carbon Dioxide, Conductivity and Ozone.
The M400 PA is a mixed mode transmitter able to handle analog or ISM (digital)
sensors.
communication capabilities for measuring various properties