Set Up Your Printer - Lexmark OptraImage Installationshandbuch

Step 1:
The following printers are supported:

Lexmark Optra
You may have received more than one
copy of the Drivers, MarkVision and
Utilities CD. When installing printer
drivers, make sure you use the latest
version.
Turn All Power Off
OptraImage Setup Guide

Set up your printer

T and Optra C710.
CAUTION:
1
Set up the printer according to the instructions in the
documentation shipped with your printer. This includes
setting up all bins and trays, duplex hardware, and any
other options you may have purchased.
If you attach the printer to a network, save your network
setup page because you will use the information
contained on it during the OptraImage setup.
2
Verify the printer hardware setup by printing the menu
settings page. Instructions for printing this page are
included in your printer setup documentation.
3
Turn the printer power off before continuing with the next
step. Please read the following explanation.
Before and during OptraImage setup, unplug all power cords,
fax/phone cables, and network cables from their wall outlets.
This includes all cords and cables attached to a workstation,
printer, MarkNet print server, scan unit, and any other
peripherals powered from a wall outlet.
Following setup, all equipment may be plugged into properly
grounded or fax/phone wall outlets and turned on.
3