Lexmark OptraImage Installationshandbuch Seite 13

It doesn't matter which form of the UAA
you use (MSB or canonical).
You can find information about installing,
using and troubleshooting the utility on
the Drivers, MarkVision, and Utilities CD.
OptraImage Setup Guide
Method 2: Print server TCP/IP setup utility
You can use this simple utility to initialize the IP address if
your computer is running Windows 95/98, Windows NT, or
Windows 2000.
You need to know the 12-digit physical address (UAA) of the
print server to use this method. The UAA is listed on the
network setup page. See "Print a network setup page" on
page 10.
To install the utility:
1
Launch the Drivers, MarkVision and Utilities CD that
shipped with your OptraImage hardware.
2
Do a custom install to add network support.
3
In the list of installable components, select Print Server
TCP/IP Setup Utility.
4
Follow the instructions on your screen.
11