Specifications; General Safety Rules - Makita BPB180 Betriebsanleitung

ENGLISH
1. Battery cartridge
2. Button
3. Red part
4. Lock-off button
5. Switch trigger
6. Speed adjusting dial
7. Lamp
8. Tighten
9. Loosen

SPECIFICATIONS

Max. cutting capacity
Blade diameter
Blade size
Overall dimensions (L x W x H)
Rated voltage
• Due to our continuing program of research and development, the specifications herein are subject to change without
notice.
• Note: Specifications may differ from country to country.
Symbols
The following show the symbols used for the equipment.
Be sure that you understand their meaning before use.
................ Only for EU countries
Do not dispose of electric equipment
together with household waste
material!
In observance of European Directive
2002/96/EC on waste electrical and
electronic equipment and its
implementation in accordance with
national law, electric equipment that
have reached the end of their life must
be collected separately and returned to
an environmentally compatible
recycling facility.
Intended use
The following show the symbols used for the equipment.
Be sure that you understand their meaning before use.
4
Explanation of general view
10. Protrusion
11. Lever
12. Blade
13. Bearing
14. Upper holder
15. Lower holder
16. Wheel
17. Press
18. Screw
Model
Round workpiece
Rectangular workpiece
Length
Width
Thickness
Net weight

GENERAL SAFETY RULES

END001-1
WARNING:
Read all instructions. Failure to follow all instructions
listed below may result in electric shock, fire and/or
serious injury. The term "power tool" in all of the warnings
listed below refers to your mains-operated (corded) power
tool or battery-operated (cordless) power tool.
SAVE THESE INSTRUCTIONS.
Work area safety
1. Keep work area clean and well lit. Cluttered and
dark areas invite accidents.
2. Do not operate power tools in explosive
atmospheres, such as in the presence of
flammable liquids, gases or dust. Power tools
create sparks which may ignite the dust or fumes.
3. Keep children and bystanders away while
operating a power tool. Distractions can cause you
to lose control.
Electrical safety
4. Power tool plugs must match the outlet. Never
modify the plug in any way. Do not use any
adapter plugs with earthed (grounded) power
tools. Unmodified plugs and matching outlets will
reduce risk of electric shock.
5. Avoid body contact with earthed or grounded
surfaces such as pipes, radiators, ranges and
refrigerators. There is an increased risk of electric
shock if your body is earthed or grounded.
19. Stopper plate
20. Cutting wax
21. Tire
22. Lip
23. Limit mark
24. Screwdriver
25. Brush holder cap
BPB180
120 mm dia.
120 mm x 120 mm
1.4 - 2.7 m/s
1,140 mm
13 mm
0.5 mm
523 mm x 231 mm x 313 mm
6.4 kg
D.C. 18 V
GEA002-3