Preparation For Use - eta Laura Bedienungsanleitung

GB
III. PREPARATION FOR USE
Symbols shown on the display
A – age
B – symbol for muscle mass analysis
C – symbol for bone analysis
D – Male / Female
E – User memory 0 to 9
F – Units of height and weight
G – Particular items of the analysis ("fat"; "TBW"=total body water; "BMI"=Body Mass Index;
„KCAL"=recommended daily calorie amount
Analysis result indicator
Underfat=malnutrition
Healthy=normal
Overfat=overweight
Obese=obesity
A
B
C
D
E
Remove all the packing material and take the scale out. Remove all possible adhesion foils,
stick–on labels or paper from the scale. Open the battery cover on the bottom of the scale,
insert the battery with the correct polarity and close the cover in the opposite direction.
Place the scale on flat, stable and dry
weighing surface and check the weight unit displayed on the display (kg). If you prefer to
set st:lb or lb unit, you can switch it over after you turn on the scales (in weighing mode) by
pushing one of the directional arrow-button ( ,
kg = kilogram
lb = pound (British weight unit)
st:lb = stone:pound (American/British weight unit)
FT;In = feet;inches
Replacing the batteries
Open the battery cover on the bottom of the scale (pic. 2). Insert a battery with the right
polarity and close the
the appliance for some time, take the batteries out!
surface. Turn on the scale by tapping your foot on the
cover. Use AAA batteries (3 pcs) for this appliance. If you are not using
).
1 kg = 2.2 lb
1 lb = 0.454 kg
1 st = 6,356 kg
1 FT = 30.48 cm; 1 In = 2,54 cm
22 / 51
F
G