Preparation For Use - eta Pocky Bedienungsanleitung

EN
A1 — unit of scale
A2 — display
A3 — weighing surface
A4 — Z/T button – selecting the weight reset function
A5 — UNIT button – change the units
A6 — ON/OFF button – switching the scale on/off
A7 — battery cover
A8 — cover
III. PREPARATION FOR USE
Unpack the scale from packaging. Before the very first use, wipe that part
of the appliance that may come in contact with foods.
Installation of battery
Battery: 1x 3V CR2032 (included; if there is an insulation band on the
To replace battery
Remove the battery compartment cover on the back side of the scale by
shifting it in the direction of the arrow (see Fig. 1) and connect a new 3V
battery to the connectors. Please take note to the polarity. The other way
round replace the battery cover until it engages, an audible click will be heard.
– Batteries not intended for this purpose must not be charged.
– Remove the battery if you will not be using the appliance for a long time.
– The supply terminals must not be short-circuited.
IV. OPERATION INSTRUCTIONS
Results of measuring and readings on the display
Data on display
194.3 g
6.855 oz
battery, remove it to connect the battery).
Notes
Unit
g weight in grams
oz weight in ounces
16
Indication