6
F
Press the ON button (F).
•
The machine may make some operating noises. This is normal operation.
•
It takes about 5 seconds for the ON button to work after the power cord is plugged in.
Appuyez sur le bouton MARCHE (ON) (F).
•
L'appareil émet des bruits de fonctionnement. Ceci est normal.
•
Il faut environ 5 secondes pour que le bouton MARCHE (ON) réagisse après le branchement
du cordon d'alimentation.
Drücken Sie die Taste EIN (ON) (F).
•
Das Gerät gibt unter Umständen Betriebsgeräusche aus. Dies ist völlig normal.
•
Es dauert ca. 5 Sekunden, bis die Taste EIN (ON) nach Anschluss des Netzkabels funktioniert.
Premere il pulsante ON (F).
•
La stampante potrebbe emettere rumori durante il funzionamento. Tali rumori fanno parte del
normale funzionamento.
•
Il pulsante ON si accende circa 5 secondi dopo il collegamento del cavo di alimentazione.
7
H
Use the { or } button (G) on the Operation Panel to select the language for the
LCD (Liquid Crystal Display) (H), then press the OK button.
•
If you want to change the language shown on the LCD, press the Back button (I) to return to
the Language selection screen.
Utilisez le bouton { ou } (G) du Panneau de contrôle pour choisir la langue de
l'écran LCD (Liquid Crystal Display) (H), puis appuyez sur le bouton OK.
•
Si vous voulez changer la langue d'affichage de l'écran LCD, appuyez sur le bouton
Précédent (Back) (I) pour revenir à l'écran Sélection de langue (Language selection).
Wählen Sie mit der Taste { oder } (G) auf dem Bedienfeld die Sprache für die
LCD-Anzeige (Liquid Crystal Display, Flüssigkristallanzeige) (H) aus. Drücken Sie
anschließend die Taste OK.
•
Wenn Sie die auf der LCD-Anzeige angezeigte Sprache ändern möchten, drücken Sie die Taste
Zurück (Back) (I), um zum Bildschirm Sprachenauswahl (Language selection) zurückzukehren.
Premere il pulsante { o } (G) sul pannello dei comandi per selezionare la lingua
per il display LCD (Liquid Crystal Display) (H), quindi premere il pulsante OK.
•
Se si desidera modificare la lingua visualizzata sul display LCD, premere il pulsante Indietro
(Back) (I) per tornare alla schermata Selezione lingua (Language selection).
I
G